How Do You Prepare a Plastered Wall for Tiling?

It’s easier than you think. Plastered walls are reliable and resilient, and they are the ideal material base to press some tiles upon. With a little elbow grease and good luck, you can get the job done in a jiffy. First, you must determine the calibre of the plaster. If it comes undone at the slightest touch, go for another better brand. You don’t want your tiles falling off one by one in an unpredictable fashion. 

Whether the plaster has a particular hue or it comes in a bare-bones style can surely accommodate some tiles. Peel off the bits of paint left utilizing sandpaper. You might need to fix some of the defects in the plaster as well. Once the dressing loses its moisture, you can begin the tilework. Remember to apply some glue-like material to the sauce before you stick the tiles on top. The glue could be resin or epoxy, depending entirely on your choice. Try to buy tiles that are slim in their design since these work best with plaster. Some issues may arise with concrete materials since they do not interact most appropriately with plaster. 

The plaster wall has to be prepared in a perfect style. This means that: 

  • Not only should it be on a level field, but it should also have no water as a part of its contents. 
  • The solidity of the material must be like iron, and it also ought to have a durable structure. 
  • The prep work is different if you plan to put tiles on plaster in a shower stand in the washroom. Since water keeps on striking the tiles, extra precautions must be taken to guarantee a reliable plastered wall with tiles on top of it.
  •  Remove any wallpaper or plywood before you stick the tiles on the surface though. 

You may need spackling or sand to fill up any nooks and crannies in the case of plaster. After that take a long sturdy piece of wood and slide it on the plastered wall to make sure that it has no faults. Remember, there is no fixed method to apply when it comes to a plastered wall. What suits one situation may be unsuitable for another one. If the plaster is aged, it may not be the best material to put tiles on. Make sure it is capable of supporting tiles by getting an honest expert’s opinion. A fresh coat may be the ideal requirement in such a case. 

While many prefer a flat plastered wall, others want a wavy one. We say, to each his own. Also sometimes a mortar bed needs to be affixed to the plastered wall. For this, a staple gun is utilized to attach the original layer upon the wall. After that comes the metal lath layer. A filler will be needed to smooth out the rough parts. If the wall contains asbestos, do not use sandpaper since this does not give the desired result. You should clean the wall’s surface before you plaster it and tile it since this way there won’t be any chances of the plaster or the tiles getting detached from the substrate. 

These were some of the methods of getting a plastered wall in tiptop condition to add some tiles to it. Follow the methodology, and you may have the ideal kitchen (or washroom) with tiled walls to impress all those who enter your home.

Leave a Reply

Your email address will not be published. Required fields are marked *